Does a Verbatim SSD Include Cloning Software?
Cloning software availability can differ by Verbatim SSD model, package, region, and current promotion. Check the exact product page or box rather than assuming every Verbatim SSD includes a license.
Check what came with your SSD
- Read the model number on the SSD label and compare it with Verbatim's product page and support/download section.
- Inspect the packaging for a software entitlement, download code, or migration instructions. Avoid unrelated installers advertised as 'Verbatim cracks'.
- Confirm whether any bundled tool supports your Windows version, disk layout, and the SSD interface.
- If there is no suitable bundle, choose a reputable disk-cloning tool or perform a clean Windows installation.
Prepare to migrate
A new SSD can be attached internally or through a compatible USB enclosure. Back up important files, record the source and target model numbers, and confirm the destination has enough capacity. A clone erases the destination.
Clone the Disk with Qiling Disk Master
When a vendor bundle is absent or unsuitable, Qiling Disk Master provides a disk-clone workflow. The screenshots below show Qiling controls, not Verbatim's software.
Step 1. Connect the new destination drive. In Qiling Disk Master open Tools and utilities and choose Disk/Partition clone. For a Windows boot-drive replacement, select the whole disk rather than just C:.
Step 2. Select the original disk as the source. Confirm its model, size, and partition map, including any boot and recovery partitions. Click Next.
Step 3. Select the replacement drive as the destination by model and capacity, then click Next. All data already on that destination can be overwritten.
Step 4. Review the direction and partition layout. Check that required partitions fit on the destination; enable Optimize for SSD if it is an SSD and the option is available. The illustrated preview shows the controls; check the full layout on your own PC.
Step 5. Click Proceed. Confirm the overwrite warning only after verifying the destination. Keep both drives connected while the progress screen runs; after completion, boot-test the new drive before erasing the original.
Clone and first boot
- Use disk clone rather than simple file copy when replacing a Windows boot disk.
- Select the old drive as the source and the Verbatim SSD as the target, then inspect the partition preview.
- Start the clone only after reading the erase warning. Keep both drives connected until it completes.
- Install the Verbatim SSD in its final slot, boot from it, and verify Windows, apps, and files before reusing the old drive.
If vendor software will not detect the SSD
Confirm the SSD is visible in firmware and Disk Management. Some vendor tools check for a supported device and may not recognize every USB bridge; use the exact vendor instructions for your model.
Frequently Asked Questions
Does every Verbatim SSD include a cloning license? Do not assume so. Check the exact product and package documentation.
Does the target need formatting first? A whole-disk clone overwrites the target layout, so pre-formatting is normally unnecessary.
Conclusion
Software bundles vary by exact Verbatim model and package. Check the manufacturer documentation, then use a compatible tool and verify the SSD boots.
Related Articles
- Windows Cloning Tutorials
Review system disk and HDD-to-SSD cloning guides. - Windows Disk Backup and Restore Tutorials
Find disk image backup and recovery workflows for Windows drives. - Windows System Backup and Restore Tutorials
Explore system image, recovery, and restore guides for Windows.
Products
Articles & Tutorials
- Data Recovery
- Data Backup
- File Recovery
- File Backup
- System Backup and Restore
- Disk and Partition Clone
- Technical articles
- Mobile articles
- Disk Master Help
- Windows Data Recovery Tutorials
- Windows Secure Delete Tutorials
- Windows Partition Management Tutorials
- Windows File Backup and Restore Tutorials
- Windows System Backup and Restore Tutorials
- Windows Disk Backup and Restore Tutorials
- Windows Clone Tutorials