SSD Health Check Software Free Download in 2022

Introduction

SSDs are gradually replacing conventional HDDs as storage devices, thanks to their mechanisms that provide increased performance, reduced energy usage, and quicker read and write rates. Because SSDs have several advantages, they are considerably more expensive than hard drives and, like conventional hard disk drives, are likely to be damaged after extended usage.

If you want to keep track of the SSD state, you should utilize an SSD Health Check Software Free Download. These handy tools aid in determining the present state of an SSD Drive's health and performance. However, finding a good one is challenging, but don't worry. In this article, you'll find some of the finest SSD health check tools. Let's get going!

How Do I Check SSD Health?

After extended use, SSDs are expected to be damaged or might have an impact on performance. To know how long your SSD can survive, you need to check the health of your SSD. That's where a quality SSD health check software comes into place. Some of the excellent SSD health check tools are below:

1. Crystal Disk Info

It is a free and open-source SSD software that shows all information about the SSD you're using. Crystal Disk Info can monitor the health and temperature of solid-state drives and other kinds of hard discs.

You can simply examine the read and write speeds and the disc error rates after installing this utility on your computer. Crystal Disk Info is quite useful for monitoring the health of an SSD and any firmware changes.

Key Features

• While working on your system, you may monitor SSD performance in real-time.
• You will get alert mail and alarm choices.
• This utility supports almost all SSD discs.
• It delivers S.M.A.R.T. data, including reading error rate, seek response time, throughput performance, power cycle count, etc.

To check your SSD health using Crystal Disk Info, follow these steps:

Step 1: Download and Install Crystal Disk Info on your PC.

Step 2: When you launch Crystal Disk Info on your PC, you'll see a slew of data about your SSD.

Step 3: Based on the condition of your SSD, your SSD health will be shown below the Health Status tab.

Note: If the SSD's health is Unknown, the SSD requires a firmware update, or Crystal Disk Info does not recognize the controller.

2. Kingston SSD Manager

As the name implies, Kingston SSD Manager is designed to monitor the performance and health of Kingston solid-state drives. Use this incredible tool to do various tasks such as updating SSD firmware, checking disc utilization, verifying disc over-provisioning, and much more. Furthermore, you can securely and quickly erase the data from your SSD.

Key Features

• It can be used to upgrade SSD firmware and monitor disc utilization.
• It does real-time health checks on the SSDs.
• It allows you to manage TCG Opal and IEEE 1667 networks, among other things.
• You have the option of storing the SSD's health check reports.

To monitor the health status of SSD using Kingston SSD Manager, follow these instructions:

Step 1: Download and Install Kingston SSD Manager on your PC.

Step 2: Launch the software and select the Health section from the above tab.

Step 3: Now, you can see the health status of your SSD along with its percentage.

Note: If the health status is rad, you need to upgrade your SSD.

3. Qiling Partition Master

Qiling Partition Master is a free utility that will check your drive for system issues and faulty sectors and show you whether your hard disc has any difficulties. After examining the SSD using Qiling Partition Master's File System Check features, it can detect and repair errors. As a result, you may use this application to both monitor hard disc health and, if feasible, repair damaged sectors and errors.

• Free Download
• Windows 11/10/8/7, 100% Secure

When you download the free partition management program, you'll see that it has a disc check tool. This technique of disc checking is intended to detect and repair SSD partition bad sectors, file system faults, and other disc defects.

Key Features

• Directly transfer free disc space from one drive to another, for example, from D drive to C drive.
• Partitions can be resized/moved and created, formatted, deleted, and merged.
• Even if the destination partition is smaller than the source, you may copy and clone a whole disc to another.
• It is simple to check the SSD's health using this tool.

To check the file system, follow these steps:

Step 1. Click the target partition that has a problem. 

Step 2. Choose "Surcface test" in "Disk management" page. 

Step 3. Click "Proceed" button, then operation will be immediately performed. Bad sectors will be marked as red.

4. Hard Disk Sentinel

SSD monitoring is made easy using Hard Drive Sentinel, a hard disc monitoring tool. If you're having any issues with your solid-state drive (SSD), this is your tool. Hard Disk Sentinel also shows the health of your SSD. It is an excellent software for monitoring e-SATA or USB-connected SSDs.

It operates in the background to monitor the health and performance of your SSDs at all times. In addition, this software can be used to determine the transfer speed, which can assist in identifying disc failures and other possible risks.

Key Features

• Error reports can be generated with this tool.
• As the tool runs in the background, it delivers a real-time performance assessment.
• In the event of deterioration or failure, you are alerted by this tool.
• It can run on Windows, Linux, and DOS operating systems.

To monitor your SSD's health using Hard Disk Sentinel, follow the instructions below:

Step 1: Download and install the Hard Disk Sentinel tool on your Windows PC.

Step 2: Launch the software, and you'll see a bunch of SSD information.

Step 3: Locate Health, and adjacent to that, you can see the health percentage of your SSD.

5. Samsung Magician

If you wish to know how well your SSD is doing, Samsung Magician is one of the finest free tools. Additionally, you can use this tool to evaluate the performance and reliability of your SSD.

Key Features

• It's simple to keep tabs on your SSD's condition, temperature, and performance.
• You can determine how much longer their drives have left in them.
• A system compatibility check can look for hazards to your SSD.
• It has a secure wipe option for completely eradicating all data from an SSD.

To check your SSD's health using Samsung Magician, follow these instructions:

Step 1: Download and install Samsung Magician on your PC.

Step 2: Launch the tool and go to Drive Details.

Step 3: Now, select your SSD in the Select a Drive section, and click on S.M.A.R.T. After that, you can view the SSD's health status under the Drive Health option.

6. SSD Life

One of the finest free tools for determining the health of an SSD is SSD life. You can check your SSD's health in real-time with the help of SSD life. As a result, you'll be able to have these issues resolved as quickly as you possibly can! Simply type in the name of your SSD to find out how much space is left on the device and how much data is being transferred.

Key Features

• You'll find information about the SSD's trim support, firmware, etc.
• Even the built-in SSD of MacBook Air and MacBook Pro laptops can be monitored with this tool.
• It allows you to back up your data to an external hard drive.
• The SSD health and lifetime are shown in this application through a Health Bar.

To check the SSD health using SSD Life, follow the steps below:

Step 1: Download and install SSD Life on your PC.

Step 2: Launch the software and select the SSD from the above tab.

Step 3: You'll see the health status besides Health. Moreover, you can click on S.M.A.R.T to get more technical details about your SSD.

Conclusion

SSDs are much better than traditional hard drives when it comes to performance. That's why most PCs utilize SSD these days. However, SSD degrades with time, which can make your PC slow. To monitor your SSD's health status, you need to utilize one of the above discussed SSD Health Check Software Free Download tools.

Moreover, we recommend using Qiling Partition Master since it's easy to use and helps you fix errors to enhance your SSD lifespan.

• Free Download
• Windows 11/10/8/7, 100% Secure

Related Articles

• Mini SD Card | What Is Mini SD Card, How to Format It
• SFC SCANNOW Finds Corrupted Files But Unable to Fix [Solved]
• [Solved]How to Create EXT4 Partition in Windows 11/10
• [Fixed] Windows Media Creation Tool Can't Find USB Error: We Can't Find a USB Flash Drive