You're experiencing a "Write Protected" issue on your XP system with an admin account, but it's not the primary account. This is likely due to the built-in security features of XP, which impose limitations on non-primary admin accounts. To resolve this, you can try running the command prompt as an administrator or using the built-in "Take Ownership" feature to gain write access to the USB drive or file. If that doesn't work, you might need to consider upgrading to a more modern operating system or seeking additional permissions. Would you like me to elaborate on any of these steps?
Your computer shows the "write-protected" message, indicating that your USB drive is in write protection mode, which prevents modifying or deleting data on the drive. To resolve this, you need to remove the write protection from the USB drive.
To remove the write protection from a USB drive, you can try the following methods. First, check if the write protection is enabled through the operating system, as some systems have a built-in feature to prevent writing to certain drives. If this is not the case, you can try using a third-party software or a USB drive formatting tool to remove the protection. Additionally, you can also try to remove the write protection by using a command-line interface or by checking the USB drive's settings in the BIOS or UEFI firmware.
To check if your USB drive is write-protected, look for a physical switch on the device. If it has one, check if it's in write protection mode. If it does, toggle the switch to unlock the device. If your device doesn't have a physical switch, you'll need to check if it's locked through software or other means.
If your USB drive doesn't have a physical switch, you can try using Qiling Disk Master, a simple and user-friendly software that is highly compatible with various computer operating systems, including Windows 11/10/8/7, Windows Vista, and Windows XP. This software is a great option for those with little or no computer experience and can help you successfully solve your problem.
Here are some steps for you as follows:
Step 1. Download the Qiling Disk Master, and install it.
Step 2. Enter the Disk management section.
Step 3. Right-click your write-protected SD card, and select Advanced -> Remove disk readonly.
In addition to the function mentioned above, the Qiling Disk Master also provides other useful functions for users, which can be learned about if needed in the future.
It is hoped that this article can be helpful for you to solve your problem, allowing you to remove the write protection from your USB drive and send data to the device or delete files from the device on your computer run by Windows XP.