Your iPhone getting stuck on a loading circle or black screen with a spinning wheel can occur when rebooting, updating software, or resetting to factory settings. This issue is often caused by a system error or a glitch that occurs during the rebooting process. Fortunately, there are some tricks and solutions that can help resolve this problem, which are outlined in the guide.
The iPhone loading circle or spinning wheel issue is a software problem that can be resolved by following the tips in this article, allowing the device to restart smoothly.
A force restart can resolve issues caused by problems during the reboot process, and it will retain your data without any loss. To perform a force restart, follow these steps.
Step 1. Press andrelease the volume up button quickly.
Step 2. Press and release the volume down buttonquickly.
Step 3. Press and hold the power button for a while until you see the Apple logo appear on the screen, then wait for the device to restart.
If the iPhone is stuck on the loading circle after a force restart, try fixing it in recovery mode. To do this, set the iPhone to recovery mode and update the system using iTunes on a PC or Finder on a Mac.
Steps to enter into recovery mode are similar to force start an iPhone. See the detailed steps below.
Step 1. Press and release the volume up buttonquickly.
Step 2. Press and release the volume down buttonquickly.
Step 3. Hold the button at the right until the device enters recovery mode, seeing the Apple logo during the process, without releasing it until the screen below appears.
After entering recovery mode, you can update your iPhone software using a PC or Mac, as per the instructions provided in the link.
If neither of the two solutions saves you, you can try factory resetting your iPhone, which will bring your device back to its default status. You can use a tool like Qiling MobiUnlock to quickly and securely reset your iPhone and install the latest iOS.
Step 1. Plug your iPhone, iPad, or iPod into the computer with a USB cable and open Qiling MobiUnlock. Select "Unlock Screen Passcode" from the main screen.
Step 2. To start the unlocking process, click on the "Start" button once your device has been detected by Qiling MobiUnlock.
Step 3. Click "Next" to download a suitable firmware for your device, or select the existing available firmware if previously downloaded.
Step 4. After downloading the firmware, click "Unlock Now" to proceed. A new warning window will appear, requiring you to input the necessary information in the box before clicking "Unlock" again.
Step 5. Wait for the unlock process to complete. Then, your iPhone or iPad will be erased and taken to its original settings.
When your iPhone or iPad gets stuck on a loading circle or spinning wheel, it can be frustrating. However, you can try a simple force restart to resolve the issue. If that doesn't work, you can still follow the additional solutions in this article to get your device back to normal.