Kingston Format Utility Format Fail 4/8/16/32/64/128 GB
| Workable Solutions | Step-by-step Troubleshooting |
|---|---|
| Fix #1. Disk Management | Step 1. Navigate to My Computer (Windows 7) or This PC (Windows 10) > Manage > Disk Management...Full steps |
| Fix #2. Qiling Partition Master | Step 1. Select the USB drive to format; Step 2. Set the drive letter and file system on USB...Full steps |
| Fix #3. CMD Command | Step 1. Press "Windows + R" and enter cmd. Open Command Prompt as Administrator...Full steps |
Kingston Format Utility Format Fail
The Kingston USB Format Utility is a free software available on the Kingston official website that simplifies formatting Kingston HyperX series USB flash drives. With this utility, you can format the USB drive, repair corruption, fix a RAW USB drive, remove unknown viruses, and troubleshoot file system-based problems, effectively turning the drive into a brand new one. By inserting the USB into a computer and starting the program, you can quickly receive a "format success" prompt.
Kingston format utility format fail may occur due to various reasons, including the drive being write-protected, corrupted file system, or firmware issues, which can prevent the format utility from successfully formatting the drive.
- The Kingston flash drive, specifically the DataTraveller 2.0, DT50, DTSE9, and DataTraveller G3 models, cannot be formatted as they belong to the Kingston series, not the HyperX series. This means you cannot perform a format on these drives.
- The Kingston USB flash drive is read-only or write-protected, requiring it to be unlocked in order to format it successfully.
- Other severe damage to the flash drive ports, chips, etc.
Fix #1. Format Kingston USB Flash Drive in Disk Management
Windows Disk Management is a universal tool to format internal storage or removable hard disks, and can be easily accessed in Windows 7, 8 and 10. It can also be used to format a Kingston USB flash drive when the official format utility fails.
Important: Windows Disk Management cannot format a Kingston USB drive or SD card over 32GB to FAT32, so a third-party partition manager is needed to format a 64GB USB drive to FAT32.
To format a Kingston USB flash drive in Windows Disk Management, follow these steps: Open Windows Disk Management by searching for 'Disk Management' in the Start menu, right-click on the USB drive, select 'Format', choose a file system (such as FAT32 or NTFS), and select a volume label. Then, click 'OK' to confirm the format.
Step 1. To access Disk Management, go to My Computer (Windows 7) or This PC (Windows 10) and click on Manage, then select Disk Management.
Step 2. Right-click on the Kingston USB flash drive and choose "Format".
Step 3. Select the desired file system and click "OK" to perform a quick format.
Fix #2. Format Kingston USB Flash Drive with Third-party USB Formatting Tool
Qiling Partition Master can solve the Kingston format utility format failure issue on various capacities, from 2GB-32GB to 64GB-256GB, making it a perfect disk formatting tool. It can format and repair Kingston pen drives that have stopped working, even when Windows Disk Management fails, displaying error messages like "Windows was unable to complete the format" or "the format did not complete successfully".
Fortunately, all problems encountered during Kingston troubleshooting can be resolved with Qiling partition magic, which can successfully format a Kingston pen drive even when the Kingston format utility or Disk Management tool fails.
To format a Kingston USB flash drive with Qiling Partition Master, first, download and install the Qiling Partition Master software. Then, connect the Kingston USB flash drive to your computer.
Step 1. Select the USB drive to format.
Connect the USB drive to your computer, then download and launch Qiling partition software. From the software, right-click the USB drive you intend to format and choose "Format" to proceed with the formatting process.
Step 2. Set the drive letter and file system on USB.
Assign a new partition label, file system (e.g.
Step 3. Check "OK" to confirm formatting USB.
Click "OK" if you see the Warning window. If you have important data on it, back up the data in advance.
Fix #3. Format Write-protected Kingston Flash Drive
The CMD command line in Windows DOS can be used to repair and fix a write-protected memory card or flash drive, including Kingston flash drives. As a write protection tool, it can help remove the write protection within simple steps, allowing you to format the drive in any desired format utility afterwards.
Step 1. To open Command Prompt as Administrator, press the Windows key + R to open the Run dialog box, type "cmd" in the text field, and then press the Ctrl + Shift + Enter keys to open Command Prompt with elevated privileges. Alternatively, you can right-click on the Start button, select "Command Prompt (Admin)" from the context menu, or search for "Command Prompt" in the Start menu and select the "Run as administrator" option. Once Command Prompt is open, you can enter commands to run with administrative privileges.
Step 2. Type diskpart and hit Enter.
Step 3. Type the following command lines each after and hit Enter each time.
- list disk
- To remove write protection from a Kingston flash drive, you would select disk x, where x is the number of your Kingston flash drive, typically a letter (e.g.
- attributes disk clear readonly
If you're not tech-savvy, don't worry - there are graphical-based solutions to help you remove write-protection from your hard drives, USB drives, and SD cards, making it easy to access and use them.
Qiling CleanGenius is a tool that helps fix issues on drives, making it easy to resolve problems without needing to know about command-line.
Here's an easy-To get your issues sorted using this tool, follow these simple steps: Start by identifying the specific problem or issue you're facing, and then use the tool to search for relevant solutions or resources. If you need help, click on the "Get Help" button to connect with a support specialist who can guide you through the process.
Step 1: DOWNLOAD and install Qiling CleanGenius (free) on your computer.
Step 2: Run Qiling CleanGenius on your PC, select Optimization and choose the Write Protection mode.
Step 3: Select the device that is write-protected and click Disable to remove the protection.
To Sum Up
To fix Kingston format utility format failure, you can try three solutions: formatting the flash drive in Windows Disk Management, using the Qiling formatting tool, or removing write protection via the command line or an automatic write protection remover tool.
If your case is not solved by following the advice, you can try to scan and remove the virus.
Related Articles
- Fixes for 'File Is Too Large for Destination File System' on USB/External Hard Drive
- Fixed: The Disk Is Write Protected Windows 11
- Partition Manager for Windows 11 Free Download in 2022
- Best Partition Recovery Software for Windows 11 ( Reliable and Easy)