Recover Deleted G-code Files on Windows

Updated on Oct 27, 2026 | by Qiling

Quick Navigation:

Check the Source and Existing Copies
Protect the Original Drive
Recover the Local File
Verify the Result
Frequently Asked Questions

G-code is machine instruction output, often regenerated from a slicer or CAM project. Check the original design, slicer/CAM project, removable media, and machine job history first. A recovered file must never be run blindly on equipment.

Check the Source and Existing Copies

Search the original project or export folder by name and extension. Check the Recycle Bin and any available backup or version history. If the file was only stored in a cloud service, use that service's restore tools first; a local disk scan cannot search cloud-only data.

Preserve any surviving source design and machine profile. If the file was on a printer SD card or USB drive, stop writing new jobs to that medium.

Protect the Original Drive

Identify the physical disk that held the missing G-code job file (.gcode). Stop creating files on it, including downloads, application saves, and recovery output. Prepare another physical drive with enough free space for recovered candidates. If the drive makes unusual noises, repeatedly disconnects, or has hardware errors, avoid stressing it with scans and seek specialist advice.

Recover the Local File with Qiling Deep Data Recovery

Qiling Deep Data Recovery can scan Windows-visible local storage for deleted files. It cannot reconstruct a file that was never saved or guarantee recovery after its data has been overwritten. Check the application's own backups first.

Free Download
Windows 11/10/8/7, 100% Secure

Step 1. Choose the Recovery Mode

Open the program. For a recent deletion on a local disk, choose Fast Scan; use Recycle Bin Scan if the item was emptied from the bin. For a removable card or USB drive, choose USB/SD Scan. If the source was formatted, use Format Scan. Match the mode to what happened rather than the file extension.

Choose the Qiling recovery mode for G-code job file (.gcode)

Step 2. Select the Original Location

Select the disk or partition that actually held the missing file. Confirm its capacity and drive letter, especially if several external devices are attached. Do not select the destination drive prepared for recovered files.

Select the original drive for G-code job file (.gcode) recovery

Step 3. Review Matching Candidates

After the scan, search by filename and extension when available. Compare likely folders, dates, and file sizes; keep more than one plausible version if their contents cannot be previewed. If the first scan misses the file and the source is healthy, try the deeper scan option.

Review candidate G-code job file (.gcode) files in Qiling

Step 4. Recover to a Different Disk

Select the candidates, click Recover, and save them to a different physical drive. Keep the recovered files unchanged and test copies in the appropriate application. Do not replace a working backup with an unverified result.

Save recovered G-code job file (.gcode) files to another disk

Verify the Result

Review the full file with the relevant slicer or CAM preview and verify machine, material, tool, origin, and end commands. Generate a new file from the source project when possible.

If a candidate is incomplete, compare older backups, cloud versions, and other scan results. A correct filename or extension does not prove that all content survived. Once verified, make a separate backup of the recovered file and any required companion assets.

Frequently Asked Questions

Is G-code the same as the editable design?

No. It is generated instructions; recover the source project for reliable edits.

Can I run a recovered G-code immediately?

No. Inspect and simulate it with the correct machine settings first.

What if the recovered file will not open?

Test another candidate or backup in the appropriate application. Do not edit the only recovered copy; missing blocks or required companion files may be the cause.