Recover Deleted Autodesk Inventor IAM Assemblies on Windows

Updated on Oct 28, 2026 | by Qiling

Quick Navigation:

Find Existing Copies
Prepare for Recovery
Scan the Original Drive
Check the Restored Project
Frequently Asked Questions

An IAM assembles referenced IPT parts and subassemblies. First search the project, Vault history, and OldVersions for the assembly; recovering only the IAM may not restore its components.

Find Existing Copies

Search the original project folder by name and extension, including the Recycle Bin and other project locations. Check the application's recovery or backup area and any repository or team version history. A missing entry in a recent-files list does not prove that the file was deleted.

Preserve the original folder structure and part files. Do not replace current parts with older copies merely to make the recovered assembly open.

Prepare for Recovery

Identify the Windows-visible physical drive that held the missing Inventor assembly (.iam). Stop saving new project versions, downloads, or exports to that drive. Prepare another physical disk for recovered results. If the source has hardware faults or disconnects repeatedly, avoid stressing it with repeated scans and seek specialist help.

Confirm whether the missing item was actually saved locally. A deleted-file scanner cannot retrieve a cloud-only file from a remote service or recreate unsaved work. Use the service's version history or the application's own recovery feature first when those are available.

Scan the Original Drive with Qiling Deep Data Recovery

Qiling Deep Data Recovery can search local Windows-visible storage for deleted files. It cannot guarantee recovery if the blocks were overwritten or cleared by SSD TRIM. Keep the scan and recovery output off the source when possible.

Free Download
Windows 11/10/8/7, 100% Secure

Step 1. Select a Scan Mode

Open the program and match the mode to the loss: Fast Scan for a recent local deletion, Recycle Bin Scan after emptying the bin, USB/SD Scan for a removable source, or Format Scan if the original partition was formatted. The mode depends on the event, not the project file extension.

Select a Qiling scan mode for Inventor assembly (.iam)

Step 2. Choose the Source Drive

Select the disk or partition that actually stored the file. Confirm its drive letter and capacity, especially if several external disks are connected. Do not choose the separate destination disk as the source.

Choose the original drive for Inventor assembly (.iam) recovery

Step 3. Compare Candidate Versions

When results appear, search by project name and extension if available. Compare location, size, timestamp, and related files. Keep more than one plausible copy. If the source is healthy but the first pass misses the file, try the deeper scan option before changing the disk.

Review found Inventor assembly (.iam) files

Step 4. Recover to Another Physical Disk

Select likely candidates, click Recover, and save them to a different physical drive. Keep the recovered originals unchanged and test copies in a separate project workspace; do not overwrite a working backup.

Save recovered Inventor assembly (.iam) files away from the source

Check the Restored Project

Open a copy with Inventor, resolve references, and inspect constraints, occurrences, and BOM against a known revision.

If the file opens but content is missing, compare other candidates, application backups, and linked assets. A correct filename or successful preview is not proof that every referenced item survived. Back up the verified project and its dependencies.

Frequently Asked Questions

Will IAM recovery restore all its parts?

No. Referenced IPT and subassembly files may need separate recovery.

Can an older IAM be used with newer parts?

Sometimes, but test constraints and revisions in a project copy.

Where should I keep a recovered project?

Save the result on a different physical drive until it has been checked. Then make a separate backup of the complete project folder.