EaseUS Disk Copy is a standalone cloning tool built for one job: copying a disk, a partition, or an entire system drive to new hardware. It is separate from EaseUS Partition Master, so it does not carry the full partition-editing toolset.
This guide walks through the clone wizard, the limits you should know before you start, and the checks that confirm the copy will boot.
The tool is wizard-driven: pick a source, pick a destination, choose a copy mode, and start. It supports MBR and GPT disks and can resize the destination partitions when the new SSD is larger.

The default copy mode skips empty sectors and finishes faster. Use sector-by-sector only when the drive is encrypted, damaged, or must match the source exactly.

Most reported errors come from copying while the source is in use or from a target disk that is still locked by another program. Close background tools, suspend BitLocker, and reboot before retrying.
Qiling Disk Master combines the clone wizard with partition resizing and boot repair, so a failed copy does not leave you without a recovery path.
Watch the video tutorial below to clone the drive step by step with Qiling Disk Master.
Step 1. Open Qiling Disk Master, choose Clone, and then select Disk Clone.

Step 2. Select the source disk and click Next.

Step 3. Select the destination SSD and confirm that its data will be replaced.

Step 4. Choose the clone mode and resize the partitions to fit the new disk.

Step 5. Click Proceed, wait for the copy to finish, then shut the machine down before you remove any cable.

If the copy does not appear in the boot menu, select it manually from the firmware boot list. A missing entry usually means the EFI partition was not copied.
No. Disk Copy focuses on cloning, while Partition Master adds partition editing, conversion, and disk management tools.
Yes, if the used data fits. Shrink the source partitions before the clone, or the wizard will refuse the destination.
System clone mode copies the EFI and recovery partitions along with Windows. Disk mode copies everything on the disk.
Usually a locked volume, a bad cable, or a target disk that drops offline. Reconnect the drive and retry with sector-by-sector mode.
It may boot, but Windows activation and driver detection can fail. Keep the original drive until the new machine is stable.
Any clone overwrites the destination. If the source drive is failing, a full image is the only safe fallback, so back up before you start.
Watch the video tutorial below to back up Windows and restore it if the clone fails.
Step 1. Open Qiling Disk Master and select System Backup to include the boot partitions.

Step 2. Save the image to a drive other than the target disk and start the backup.

Step 3. Click Proceed to start the system backup and wait patiently until it finishes. You can also tick Shut down the computer when the operation is completed to power off automatically.

Step 4. If the copied disk will not start, restore the image and confirm the source drive is healthy before cloning again.

EaseUS Disk Copy is a focused clone tool with a clean wizard, but it expects a healthy source and a correctly sized target. Prepare the disk, choose the right copy mode, and test the copy with the original drive unplugged.
For related guides, see EaseUS Partition Master Clone Review, Best Free Disk Cloning Software 2026, Clone an HDD to an SSD on Windows 10, and Cloned Drive Won't Boot? Fix It.