Mount backup point

To mount an backup point, click on 'Advanced -> Mount' from 'Backup and recovery' page. In order to browse the files in the disk/partition image and confirm the data in it, we provide the Mount function to make sure you can restore the correct partition(s) image. Users can copy files directly from the mounted drive.

• Backup point - You can select backup point to mount.
• Password - If the image is password protected, you need to enter the password for the image.
• Letter - You can for the image specifies a drive letter.
• Mount it read-only - The mounted volume will not be writed.
• Click Mount to mount the image.