MiniTool Partition Wizard Clone Disk: Guide 2026

MiniTool Partition Wizard is a partition manager that also includes a disk clone and an OS migration option. It is often chosen by users who want cloning and partition editing in the same window.

This guide covers the clone workflow, the edition limits that decide whether the copy button is available, and the checks after the copy finishes.

What Partition Wizard Offers

Disk clone. Copies the whole disk with automatic partition layout.
Migrate OS to SSD. Moves Windows to a new drive without a reinstall.
Partition resize. Extends or shrinks volumes before and after the clone.
MBR and GPT support. Handles both partition styles and 2 TB+ disks.
Bootable media. Runs the clone from a USB when Windows will not start.

The clone and migration options sit in the same left-hand menu as the partition tools. That makes it easy to shrink the source, clone the disk, and extend the new volume in one session.

Inspect the 2.5-inch SSD before cloning the disk

Clone a Disk in Partition Wizard

Attach the target disk. Connect the SSD by SATA, USB, or an M.2 slot.
Open Clone Disk. Select the wizard from the main toolbar or the left menu.
Choose the source. Confirm the disk number and its used space.
Choose the destination. Accept the warning that the target will be wiped.
Apply the task. Review the layout, click Apply, and wait for the progress bar.

Partition Wizard queues changes instead of running them immediately. The clone does not start until you press Apply, so review the pending list before you commit.

Check the M.2 SSD layout before you apply the clone

Edition Limits and Errors

Feature gating. Disk clone and some migration options depend on the edition, so check the comparison before you start.
Pending changes confuse users. A task that is queued but not applied looks like a failed clone.
No automatic boot repair. A bad boot needs manual repair from Windows Recovery.
Locked volumes block the copy. Suspend BitLocker and close programs that hold the disk.
Small target is rejected. The destination must fit the used data before the wizard continues.

If the clone button is greyed out, the cause is usually the edition, a locked volume, or a destination that is too small. Check those three points before you reinstall the tool.

Clone with Qiling Disk Master

Qiling Disk Master runs the clone immediately, resizes the target partitions, and includes a backup path in case the copy fails.

Watch the video tutorial below to clone the drive step by step with Qiling Disk Master.

Free Download
Windows 11/10/8/7, 100% Secure

Step 1. Open Qiling Disk Master, choose Clone, and then select Disk Clone.

Choose Disk Clone in Qiling Disk Master

Step 2. Select the source disk and click Next.

Select the source disk

Step 3. Select the destination SSD and confirm that its data will be replaced.

Select the destination SSD

Step 4. Choose the clone mode and adjust the partition size if the target is larger.

Choose the clone mode and resize the partitions

Step 5. Click Proceed, wait for the copy to finish, then shut the machine down before you remove any cable.

Monitor the clone progress bar until the task finishes

Verify the Cloned Disk

Boot with the target only. Unplug the old disk before the first test boot.
Check the drive letter. The system volume should remain C.
Confirm the partition layout. Open Disk Management and check the EFI and recovery partitions.
Test your programs. Open the apps you use daily and confirm the settings load.
Boot a second time. A stable second boot proves the copy is complete.

If the new disk does not appear at all, check the cable and the SATA or M.2 port before you blame the clone. A loose connection looks like a failed copy.

FAQs About Partition Wizard

Is disk clone free in Partition Wizard?

It depends on the edition. Check the edition comparison on the vendor page, because clone and migration features are gated differently.

Can Partition Wizard clone to a smaller SSD?

Yes, if the used data fits. Shrink the source partition first, then clone to the smaller target.

Why is the clone option greyed out?

The edition does not include it, the volume is locked, or the destination is too small. Fix one of those three first.

Does Partition Wizard copy the EFI partition?

A disk clone copies all partitions. An OS migration may copy only the system and boot partitions it needs.

Can I clone a BitLocker drive with Partition Wizard?

Suspend BitLocker before the clone. A locked volume cannot be copied reliably.

Back Up Before You Clone

The clone replaces everything on the destination disk. Back up the source first so a failed copy does not cost you the data as well as the drive.

Watch the video tutorial below to back up Windows and restore it if the clone fails.

Free Download
Windows 11/10/8/7, 100% Secure

Step 1. Open Qiling Disk Master and select System Backup to include the boot partitions.

Select System Backup in Qiling Disk Master

Step 2. Save the image to a drive other than the target disk and start the backup.

Choose a folder on another drive for the system image

Step 3. Click Proceed to start the system backup and wait patiently until it finishes. You can also tick Shut down the computer when the operation is completed to power off automatically.

Watch the system backup progress until it finishes

Step 4. If the clone fails, restore the image and check the source disk for errors before you retry.

Restore the image with Disk recovery when the clone fails

Conclusion

Partition Wizard is a strong choice when you also need partition editing, but the queued-task design and the edition gating trip up first-time users. Check the edition, confirm the destination size, and apply the task before you assume the clone ran.

MiniTool ShadowMaker Review
Compare the backup sibling tool.
Best Free SSD Cloning Software
Pick a free tool that works.
Merge Unallocated Space After Cloning
Use the extra capacity.
Clone an HDD to an SSD on Windows 10
Move Windows without reinstalling.
Cloned Drive Won't Boot? Fix It
Repair the boot after cloning.