How to Fix Deep Data Recovery Crashes, Stuck, Hangs and Freezes Up Error
Deep Data Recovery crashes, hangs, freezes up, stuck
The tech support team of Deep Data Recovery has identified some common issues that may arise when using their software to scan and restore lost data.
And if you are facing one of the below-listed problems, don't be panic:
- 1. Deep Data Recovery stops working, suddenly crashes.
- 2. Deep Data Recovery may hang, freeze, or get stuck while scanning data due to various reasons. This could be caused by corrupted or damaged files, issues with the operating system, or problems with the program's own algorithms.
- 3. Deep Data Recovery seems dead, no responding.
- 4. Deep Data Recovery has encountered a memory problem and needs to be closed.
To save time and energy, you can follow the solutions and tips provided here to quickly resolve the issues you're currently facing.
Fix Deep Data Recovery hangs, freezes up or stuck error
If Qiling data recovery software freezes up or hangs while scanning data on your PC, try closing other resource-intensive programs, disable any antivirus software, and restart your computer. If the issue persists, try running the software as an administrator, check for any disk errors, and update your operating system to the latest version. If none of these solutions work, consider reinstalling the software or seeking technical support from the manufacturer.
Method 1. Go through the right steps to restore data (scanning stuck, hangs)
Deep Data Recovery may take a long time to scan large storage devices with massive data, but this is not a stuck or hanging issue.
Be clear that you're going through the right data recovery process. It's normal for the process to take some time, so be patient and let the system do its job.
- 1. Use a genuine version of Deep Data Recovery
- 2. Don't pause or halt the scanning process
- 3. Take the rights steps to scan and recover data:
Step 1. Select file types and click "Next" to start
Launch Deep Data Recovery. Select file types and click "Next" to start the recovery process.
Step 2. Select a location and start scanning
Choose the partition where you lost data. Then, click "Scan".
Step 3. Filter and preview files
To find the files you need, use the file format filter on the left or upper right corner. Once you've found the desired files, you can either click the "Preview" button or double-click on a file to preview its content.
Step 4. Recover lost data or files
To recover lost data, select the file, click the checkbox next to it, and then click "Recover" to save it to a secure location.
Method 2. Fix Deep Data Recovery hangs or dead error
- Step 1: Check if Qiling Data Recovery hangs or dies while scanning
- 1. Check if the scanning process is working on Deep Data Recovery.
- 2. If the scanning process has been suspended, click the "Pause" button.
- Step 2:If Deep Data Recovery hangs, freezes or becomes unresponsive, you can try to resolve the issue by using the Task Manager.
- 1. Press "Ctrl+Alt+Delete" keys to enter Task Manager.
- 2. Find the DRWUI.exe or Deep Data Recovery and verify if the memory is changing.
- If the Memory is changing, Deep Data Recovery is working normally, not stuck or dead. You just need to wait.
- If the Memory shows as 0% and no changes occur, select Deep Data Recovery and click "End Task" to resolve the dead error.
- 3. Close other running applications, including antivirus and firewall, to speed up the searching process.
- Step 3: To recover lost data, simply re-launch Deep Data Recovery to scan and find your lost data again.
Method 3. Troubleshoot Qiling data recovery scan stuck, freezes up error
- Step 1: Disable RAW files that freeze Deep Data Recovery while scanning
- 1. To resolve the issue, locate the Config.dat file at the installation path of Deep Data Recovery. This file is likely to be found in the main directory where the software is installed.
- 2. To fix the issue, open the file with Windows Notepad and change the parameter from 1 to 0 in the line of ScanRaw.
- Step 2:Clean your computer of viruses and replace devices with bad sectors that are causing freezing issues, and then use Deep Data Recovery to restore your data.
- Step 3: Relaunch Deep Data Recovery and re-scan device to find lost data.
Tips to Avoid Deep Data Recovery crashes, stop working error
Here are some practical tips to avoid Deep Data Recovery stuck, hangs or freeze error, ensuring a smooth, fast, and secure data recovery process on various storage devices.
1. Stop using cracked Deep Data Recovery, choose the genuine version
Using the cracked or unofficial version of Deep Data Recovery can lead to software crashes or issues while restoring lost data.
Installing packages or using an unauthorized activation code can lead to serious software crashes, data loss, or even system failure.
Therefore, your very first step is to give up cracked Deep Data Recovery and install an official version:
2. Clean up virus, remove malware
Deep Data Recovery may be hindered by bad sectors or a virus/malware, causing the scanning process to suspend, leading you to believe the software is dead or stuck.
Regularly run virus cleaner software to remove viruses and malware, and consider upgrading devices with bad sectors to a secure one.
Related Articles
- Completely Recover Data Lost by DISKPART Clean/Format
- No Bootable Device Error - What Does It Mean, What Cause the Error, How to Fix
- [Solved] Transcend USB Pen Drive Not Detected/Not Working
- Pen Drive Recovery: Pen Drive Data Recovery Software Full Version Free Download